We're are excited to be working on the integration of The Pharaoh ED 3D Printer from Mass Portal. Please visit our forum for more information on the integration of this printer and to request the printer you think we should integrate next. Happy Printing!
DimensionsWidth: 32 cmDepth: 31 cmHeight: 63 cmWeight: 15 kgMax. build areaDiameter: 20 cmHeight: 18,6 cm — whole diameter, 20,5 cm — in the middleSquare: 15 cm width x 15 cm depth x 18,6 cm heightPrintingPrint technology: Fused Filament Fabrication (FFF)Print speed: 30 mm/s – 300 mm/s- The actual print speed depends on the object's geometry, material, nozzle diameter, layer thickness, desired printout qualityTravel speed: 30 mm/s – 400 mm/sAmbient temperature: 15° – 33° CMechanical DesignAluminium extrusion profile frame, acrylate body panelsEnclosed, LED illuminated print chamberRemovable, transparent side and front doorsDelta robot:- Indirectly mounted relative to frame- Precision HIWIN linear guides- Carbon fibre delta robot diagonal rodsPrint HeadPharaoh™ all-metal hot-end- Designed and manufactured by Mass Portal- Constructed entirely of metal- Dual ceramic heating cartridgesPrinting temperature up to 300° CInterchangeable brass nozzles, diameter 0.4 – 1 mmLED illumination of the printed objectPrint BedHeated brass print bed — up to 110° CAutomatic leveling system- Calibrates printer at the user request- Measures bed level at 4 points- Contact-less inductive sensorPrinting MaterialsRecommended: PLA (Polylactic Acid) thermoplasticExperimental: ABS, PET, PVA, HIPS and other thermoplasticPlastic filament diameter: 1.75 mmCan use filament from various manufacturersPrinter OperationComputer-driven: USB 2 connection Standalone: LCD screen with 5-way controllerBuilt-in SD-card reader (standard size cards)Printer control language: G-codeRepetier-Firmware printer control software Electrical ParamatersInternal power supplyLine: 110 – 240 V AC / 50 – 60 HZPower: Max. 305 W; nom. 115 W; standby 15 W SoftwareRepetier-Host: Controls the printerSlic3r: Prepares objects for printing, operated from within Repetier-Host3D object file formats: .STL and .OBJOperating systems: Windows (automated setup), Mac, Linux