Central control
Monitor and control every Prusa printer from a single interface, wherever you are.
Run your Original Prusa MK4 and i3 MK3 printers from one cloud dashboard. Slice in the browser, share printers with your team, queue jobs and see every print, alongside any other brand you own.
Works with 200+ printer models, so Prusa printers sit next to the rest of your fleet.
We have an amazing group of students working on solving real-world problems using these printers, as opposed to if all these machines were sitting there collecting dust.
Mitra AnandAdvanced Technology and Prototyping Specialist, Worcester Polytechnic InstituteMonitor and control every Prusa printer from a single interface, wherever you are.
Slice in the browser with printer profiles, or upload G-code you sliced in PrusaSlicer.
Check the model, orientation and toolpath before anything reaches the printer.
Adjust layer height, infill density and speed to balance quality and print time.
Track print time, filament usage and success rates for every printer and user.
Connect 3DPrinterOS to your own tools and automate repetitive tasks.
Start a free trial of 3DPrinterOS.
Install the 3DPrinterOS client on a PC or Raspberry Pi and connect your Prusa printers to it.
Upload a model, slice it in the browser and send it to any Prusa in your fleet.
Connect your printer to 3DPrinterOS once and manage it from any browser.
See the status of every printer, queue jobs and send each one to the next free machine, from a single browser tab.
Preview models, check orientation and fine-tune settings before printing, so fewer jobs fail and less filament is wasted.
Give students, staff and engineers the right access, approve jobs and set print limits so every printer is used fairly.
Click through slicing a model and sending it to a printer in 3DPrinterOS.
Universities run shared Prusa labs for hundreds of students.
Higher education →Schools manage classroom Prusa printers from one place.
K-12 schools →Print farms queue jobs across racks of Prusa printers.
Print farm management →Engineering teams prototype on Prusa printers across sites.
Enterprise →3DPrinterOS works with Original Prusa printers, including the MK4 and i3 MK3 series, alongside 200+ other printer models.
Yes. Upload G-code sliced in PrusaSlicer, or slice directly in the browser with 3DPrinterOS.
Install the 3DPrinterOS client on a PC or Raspberry Pi and connect your printers to it. They then appear in your cloud dashboard.
Yes. Prusa printers can sit in the same dashboard and queues as Bambu Lab, Ultimaker, Creality and other printers.
Yes. 3DPrinterOS tracks print time, filament usage and success rates for every printer and user.
Start a free trial or talk to an expert about your setup.
Used by higher education, enterprises, and OEMs to manage printers, files, and users from a single, cloud-based platform
Control access, users, and print permissions by team or lab
“This close collaboration has enabled Koenigsegg to tailor the platform to their specific needs, resulting in an optimized and user-friendly system for managing their 3D printers.”
Team Leader
Koenigsegg Automotive AB
Book your personalized assessment now and get your free trial.
