Unboxing: The Pharaoh ED 3D Printer from Mass Portal | 3DPrinterOS

Unboxing: The Pharaoh ED 3D Printer from Mass Portal

We’re are excited to be working on the integration of The Pharaoh ED 3D Printer from Mass Portal. Please visit our forum for more information on the integration of this printer and to request the printer you think we should integrate next. Happy Printing!

Width: 32 cm
Depth: 31 cm
Height: 63 cm
Weight: 15 kg

Max. build area
Diameter: 20 cm
Height: 18,6 cm — whole diameter, 20,5 cm — in the middle
Square: 15 cm width x 15 cm depth x 18,6 cm height

Print technology: Fused Filament Fabrication (FFF)
Print speed: 30 mm/s – 300 mm/s
– The actual print speed depends on the object’s geometry, material, nozzle diameter, layer thickness, desired printout quality
Travel speed: 30 mm/s – 400 mm/s
Ambient temperature: 15° – 33° C

Mechanical Design
Aluminium extrusion profile frame, acrylate body panels
Enclosed, LED illuminated print chamber
Removable, transparent side and front doors
Delta robot:
– Indirectly mounted relative to frame
– Precision HIWIN linear guides
– Carbon fibre delta robot diagonal rods

Print Head
Pharaoh™ all-metal hot-end
– Designed and manufactured by Mass Portal
– Constructed entirely of metal
– Dual ceramic heating cartridges
Printing temperature up to 300° C
Interchangeable brass nozzles, diameter 0.4 – 1 mm
LED illumination of the printed object

Print Bed
Heated brass print bed — up to 110° C
Automatic leveling system
– Calibrates printer at the user request
– Measures bed level at 4 points
– Contact-less inductive sensor

Printing Materials
Recommended: PLA (Polylactic Acid) thermoplastic
Experimental: ABS, PET, PVA, HIPS and other thermoplastic
Plastic filament diameter: 1.75 mm
Can use filament from various manufacturers

Printer Operation
Computer-driven: USB 2 connection
Standalone: LCD screen with 5-way controller
Built-in SD-card reader (standard size cards)
Printer control language: G-code
Repetier-Firmware printer control software

Electrical Paramaters
Internal power supply
Line: 110 – 240 V AC / 50 – 60 HZ
Power: Max. 305 W; nom. 115 W; standby 15 W

Repetier-Host: Controls the printer
Slic3r: Prepares objects for printing, operated from within Repetier-Host
3D object file formats: .STL and .OBJ
Operating systems: Windows (automated setup), Mac, Linux


1518 Pershing Drive,

APT F, CA 94129,

San Francisco, USA


49 Wyckoff Ave,

Brooklyn, NY 11237, USA


Mektory Innovation Center building

Raja 15 , Tallinn,

12618, Estonia

Follow us!

Site Map