How can I connect my webcam for video monitoring?

Answered by the 3DPrinterOS team

To connect a webcam for video monitoring in 3DPrinterOS, plug the camera into the PC or Raspberry Pi your printer is connected through, then open Printer Settings from the three-dot menu next to the printer on the Printers page and select that camera. Camera settings are only available while the printer is online.

Step by step

  1. Connect the webcam to your PC or Raspberry Pi.
  2. Check that the printer shows as online in 3DPrinterOS.
  3. Go to cloud.3dprinteros.com/#/printers and click the three dots next to the printer.
  4. Open Printer Settings and choose the correct camera.

If the camera options do not appear, the printer is most likely offline. Bring it back online and open Printer Settings again.

Choosing and placing the camera

The camera should be compatible with the 3DPrinterOS Client, have a resolution of 640x480 or better, and get a clear, unobstructed view of the print bed with even lighting. These are also the requirements for Print Fail Detector, which uses the camera feed to flag likely failures and notify the job owner and admins.

What you can do once it is connected

You can follow prints through the live feed from an internal or external webcam, stream video, capture snapshots and create time-lapses, from any device. The feed sits next to live status and progress, so you can decide remotely whether to pause or cancel a job.

Read more about 3D printer monitoring software.

Trusted by leading universities, enterprises and government

Yale Google Duke NASA Koenigsegg Bosch MIT HP