We're are excited to be working on the integration of The Felix 3D Printer. Please visit our forum for more information on the integration of this printer and to request the printer you think we should integrate next. Happy Printing!
Specifications:Power max: 220WVoltage: 110-240V, automatically adjusting powersupplyNozzle diameter: 0.35mmBuild volume: (x, y, z) (255, 205, 235) mm, When printing where dual extrusion is required, the buildvolume reduces to 240mm. But when printing with a dual head and only using one of the two nozzles the x range is 255Layer height: 50 micron to 300 micronHeated bed temperature range: 0 - 95 degC, When isolating bottom temp can go upto 115 degC. Ultra light aluminum sandwich plate.Nozzle temperature range: 0- 275degCAxes positioning resolution: (x, y, z) (50,50,10) micronDisplay unit: 20x4 character display, for assembled printer this is standard included.Stand alone printing MicroSD card reader integrated into electronics board. So stand-alone printing is possible even without the display unitThe printer is designed in the following modules:Frame module:Extruded aluminum frame partsEasy connectors, the frame is assembled by just screwing 6 hex boltsX (moving head) and Y (moving table) module:Linear ball bearingPrinted partsToothbeltPulleyOpto-sensorNEMA 17 motorHeated bedZ-axis module:Linear ball bearingPrinted partsPrecision machined trapezium lead screw with bronze nutOpto-sensorNEMA 17 motorExtruder/Hot-End module: (this is multiplied by two when you have a dual extruder printer)Hot End2x FanNEMA 17 motorElectronics module:FELIXprinters electronics3x opto-sensors1.8m USB cablePower cableDisplay Unit includedMiscelleaneous parts:Tie wrapsBolts and nutsHandle12V 250W Powersupply FlexATX